APS & SRP Insulation Rebates in 2026: How Queen Creek Homeowners Can Save

Most Queen Creek homeowners upgrade their attic insulation without ever finding out they left real money on the table. Both SRP and APS offer rebates for qualifying insulation improvements, and depending on your utility and your project, those incentives can meaningfully offset the cost of getting your attic to R-49+. Here's how the programs work in 2026 and how to make sure you actually capture them.

SRP insulation rebates

SRP customers can qualify for rebates up to roughly $600 for qualifying attic insulation upgrades that meet program R-value and installation requirements. SRP's program is built to encourage homeowners to bring under-insulated attics up to today's recommended levels rather than stopping at bare code minimum, which lines up directly with the R-49+ target we recommend for Climate Zone 2 desert homes.

APS insulation rebates

APS customers can qualify for rebates up to roughly $1,000 for qualifying insulation improvements, generally the larger of the two utility programs available to East Valley homeowners. Like SRP, the rebate is tied to hitting specific R-value targets and using a qualified installation process — it's not a blanket rebate for any insulation work, so the project needs to be built to qualify from the start.

The BPI-certified contractor requirement

Both utility rebate programs generally require the work to be performed, or the results verified, by a BPI-certified contractor (Building Performance Institute) as part of qualifying for the incentive. This isn't just paperwork — BPI certification means the installer is trained to the diagnostic and installation standards the utilities are actually looking for, including correct R-value verification and air-sealing practices. Skipping this requirement, or using an uncertified installer, is one of the most common reasons homeowners end up doing the work but missing the rebate entirely.

Stacking with the federal 25C tax credit

On top of utility rebates, the federal Energy Efficient Home Improvement Credit (Section 25C) allows homeowners to claim a tax credit for a portion of the cost of qualifying insulation and air-sealing materials, up to annual limits set by the IRS. Because the 25C credit applies through the tax code rather than through your utility, it generally can be combined with an APS or SRP rebate on the same insulation project — meaning a single attic upgrade can qualify for a utility rebate and a federal tax credit at the same time. Confirm the specifics with your tax advisor, since eligibility and limits are tied to your individual tax situation, but for most qualifying insulation upgrades this is real additional savings on top of the utility incentives.

How the paperwork actually works

The rebate and credit process trips people up mostly because of documentation, not because the programs are hard to qualify for. Here's the general flow:

• Confirm eligibility before work starts. R-value targets and program requirements need to be built into the project scope from the beginning, not retrofitted after the fact.
• Use a BPI-certified installer. This is a hard requirement for both the SRP and APS programs and for proper verification of the completed R-value.
• Keep documentation of the completed work. Utilities generally want proof of the installed R-value and materials used — before-and-after documentation makes the rebate claim straightforward.
• File the rebate application. Each utility has its own application process and timeline; missing the filing window is another common way homeowners lose out on a rebate they otherwise qualified for.
• Keep receipts for the 25C tax credit. Your tax preparer will need documented costs for qualifying insulation materials when you file.

We handle the BPI-certified installation and the rebate paperwork as part of every qualifying Queen Creek project — you don't need to chase down utility forms or figure out program requirements on your own. Our job is to build the project to qualify from day one and make sure the paperwork actually gets filed.

A caveat worth taking seriously

Utility rebate programs change. Amounts, eligibility rules, and application windows shift from year to year as SRP and APS adjust their energy-efficiency budgets and priorities. The figures in this guide reflect the general landscape as of 2026 — always confirm current program details before you finalize a budget, and ask us to verify exactly what's available for your address when we scope your project.

Ready to see what you qualify for?

The fastest way to know exactly what your Queen Creek home qualifies for — and what your net cost looks like after rebates — is a free assessment. Call 844-967-5247 and we'll check your current insulation, confirm what SRP and APS currently offer, and build a quote that already accounts for the rebate.